Local alarm as a basis
The local combination signal device on the building is a must for every alarm chain. It warns employees or residents, effectively drives off perpetrators through its immense volume (loss of situational awareness), and provides acoustic and visual guidance (e.g., in the dark) for emergency services to the building. Stay flexible: In cases where a silent alarm is programmed, the siren remains deactivated.

Effective deterrence
Depending on the type and location of the building, a siren visibly mounted on the facade can contribute to deterring perpetrators and prevent incidents proactively.

Manipulation is futile: well-protected against sabotage
The FUSG60100 communicates with the Secoris wireless expansion (BUMO60030) in Secoris wireless mode. The sabotage protection integrated into the housing (cover and wall tamper contact) protects the wireless siren from manual manipulation (opening the housing, gaining access to the connecting cable, etc.). If someone tampers with the device, the outdoor siren immediately triggers an alarm and reports the sabotage to the Secoris control panel.

Compatibility
Secoris ESEZ60500 and ESEZ70500 via wireless expansion, BUMO60040 or BUMO60030 (control panel firmware version: 2.00.09 or higher)
Secvest FUAA50000, Secvest Touch FUAA50500 (control panel firmware version: 3.00.11 or higher)

Product features:

• Combination signal device for alerting via siren (acoustic) and LED strobe light (visual)
• High-volume alarm siren (> 100 dB(A) at 1 m) for outdoor use
• Highly visible LED strobe light (red), colored LED display for wireless signal strength and other functions
• Simple, wireless integration into the Secoris control panel (via wireless expansion BUMO60030), flexible choice of mounting location thanks to long wireless range (battery life up to 2 years)
• Device settings on the control panel (Secoris wireless): arming confirmation, jamming detection, signal tone adjustment, siren duration; on the siren via jumper (Secvest wireless)
• Fast 1-hand installation due to fixed front cover and integrated spirit level; optimized tamper contact (sabotage monitoring) can be adapted to any wall surface
• Firmware OTA updateable (Over-the-Air remote maintenance)
• Compatible with Secoris (BUMO60030) and Secvest (FUAA50000, FUA50500 and higher)
• Wireless connection in Secoris wireless mode is AES128-encrypted and replay-protected
• EN 50131 Grade 2 certified